Thecus-technology i Series Manual do Utilizador descarregar pdf (Página 18)

Step 1: Select “Quick install” then choose the RAID level to set. Please refer to

Figure 3.3.1. After choosing the RAID level, click “ ”, which

links to another page, user can set up “LUN” here.

Figure 3.3.1

Step 2: Please select a LUN number. Access control of host would show as a

wildcard “*”, which means every host can access this volume. In this page, the

“Volume size” can be changed. The maximum volume size is shown. To re-enter

the size be sure it has to be less or equal to maximum volume size. Then click

“ ”.

Step 3: Confirm page. Click “ ” if all setups are correct. Then

a page with the “User data volume” just been created will be shown as Figure

3.3.2.

Done. You can start to use the system now.

Figure 3.3.2

(Figure 3.3.2: A RAID 0 user data volume with the UDV name “QUICK98273”, named by the

system itself, with the total available volume size 222GB.)

- 18 -

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 90 91

Sem comentários

Thecus-technology i Series Manual do Utilizador Página 18